Double Glazed Window Repair
Double glazing is an excellent energy efficient investment that prevents loss of heat during winter and helps to keep your home cool in the summer. The ability to have your double-glazed windows repaired when needed is an excellent way to keep them working properly.
Over time condensation and misting could affect your double-glazed windows. Double glazed windows may be difficult to open and close.
Broken Panes
A unruly ball or a stone flying from your lawnmowers, or a storm that is strong enough can break your double pane windows which can expose your home to the elements. Even though a glass window that has been damaged is difficult to repair, it doesn't need to be replaced. The insulated glass that is between two panes of glass is still in good shape So you can repair your double-paned window on your own.
To begin, you'll need remove the broken glass from the frame. This will be an unpleasant task, and you'll want to take care to prevent any glass shards from falling onto the floor or sliding out of the frame. Make sure to wear a pair of gloves to shield your hands from injury and a cloth to protect the area around the broken glass to prevent further cuts or breakage. After removing the broken pane, carefully clean the entire frame of the window to get rid of any remaining sealant or debris. Sand rough areas of the window frame to create a smooth and even surface to put in your new glass.
After cleaning the frame after cleaning, you can apply a second layer of glass to the seam where you removed the broken pane. This is the best method to ensure that your window is sealed and protected, and it will aid in reducing energy costs by keeping water and drafts from getting into your home. Next, you will need to select your glazing material. There are several options, including clear tape that is more durable than regular tape, and can prevent further cracking of your window, or glazing film, which is similar to clear plastic wrap. The benefit of this type of material is that it can be painted over to match the frame you have and will also keep out rain and snow as well.
Regardless of the material you pick regardless of the material you select, it is crucial to press glazier's facets into the place where the putty joins the frame. These will hold the newly-formed glass in place and assist it to adhere to the frame. Hardware stores sell glazier's ropes, which you can use onto the frame rabbets.
Condensation
If you have a problem with condensation, it is recommended to contact your window manufacturer. Many companies offer warranties and guarantees that cover these problems. Condensation or fogging between the panes of your windows is a sign that the seals aren't working properly. Only a professional can fix this problem by replacing both panes.
This procedure is a bit tricky and requires special tools to remove the old pane and then install the new one, but it can be done by a professional who will provide the required equipment. It is recommended to leave the task to professionals. These tools can be dangerous.
Wear safety gloves and glasses if opt to do it yourself. You may be exposed to glass fragments flying around. It is also important to remove all the putty and metal glazing points from the grooves in which the new window will go. It is also recommended to brush the frame with wire and vacuum or wipe with a damp cloth. After the frame is dry and clean you'll need to get a replacement glass which is 1/8 inch less in each direction than your window, and then test it into the grooves.
You'll require a layer of silicone caulk into the grooves of frames to ensure your glass is securely installed. Once the caulk has dried it is time to smooth it and make any needed adjustments. The wood molding can be reinstalled.
If the weather abruptly changes, double-glazed windows may become difficult to open and close. Extreme temperatures can cause frames to shrink or expand and cause them to fall or stick. Try wiping window repairs with water and then lubricating them in the event that this happens, but it may be better to consult the company that installed your windows.
Misunderstood
Misted Double Glazing is a window problem that occurs when moisture gets trapped between the glass panes of your double glazed windows. Double glazing is comprised of two glass panes that are separated by an insulating area, typically filled with argon gas for better thermal efficiency. This creates an airtight sealing that keeps warm indoor air in, and cold outdoor air out.
The seal could be damaged over time, and water can accumulate between the panes of glass which can cause them to turn to become cloudy. This occurs because the sun's heat causes the gap between the window panes, causing the water to evaporate.
This is a natural process, but if it occurs between the panes of the window it could be a problem since it will no longer be able to regulate the temperature inside the room. Instead the temperature outside of the window will affect the temperature indoors. If you notice your double glazed windows are becoming cloudy, contact the experts at Northfield Glass to investigate.
We can replace a single blow sealed unit, without needing to replace the entire window. This is far less disruptive than a full replacement. Our misty window repair involves taking off the glass unit, cleaning it, and replacing it with a fresh one to create an airtight seal.
There are some companies in the field which claim to drill holes in your windows with mist and inject chemicals into them that they say removes the fog & condensation, however, we do not recommend this method. This method is not just ugly, but it could also harm the toughened glass, leaving you with a window which isn't functioning properly.
It is crucial to resolve the issue as soon as possible, as left untreated, it could cause mould growth, which not only damages the window but also poses health risks for your family members. The condensation in the window could cause other issues with your property such as damp or rot. In some instances, the window may need to be completely replaced.
Failed or blown
Modern double glazed windows have two glass panes, with an inert gas or air in between them. This increases their thermal efficiency by keeping heat in and cold out. Over time the gas may become depressurised and cause a variety of issues.
Condensation between the panes is among the most frequent. Although it's a normal occurrence and doesn't mean that your window is failing however it could be an indication that you have to re-seal your windows. Condensation may be an indication that your double glazing has broken, in which case it will need to be replaced completely.
Double-glazed windows may also cause draughts. This could be because of the seal being damaged or a damaged handle or a damaged lock. A draught can be evident and can result in higher heating bills, so it is important to get it fixed sooner rather than later. You can test the seals by feeling around the edges of the window frame to see whether you feel cold air.
Another sign that the seals on your windows have failed is when you begin to see water dripping on the inside of your windows. This is an indication that you need to seal your double-glazed windows.
The frames of your windows are designed to move a bit as they have to do in order to keep the glass sheets in their place. However, over time this special packaging material may get compacted, and this could crack the crucial seal. This will allow the air to move between the panes, which will reduce the energy efficiency of your window.
A seal that is blown is a clear sign that your double glazing has failed and needs to be fixed immediately. A blown seal will stop your double glazing from performing its primary function that is to keep the cold out and warm air in. A blown seal could let moisture into your home, which can result in mold and other unpleasant conditions. Contact a double-glazing specialist as soon you notice a blown window seal. They can replace the entire unit.